Skip to main content

Client Configuration

ZeroTier One is a service that can run on laptops, desktops, servers, virtual machines, and containers to provide virtual network connectivity through a virtual network port much like a VPN client. It can also act as a network controller and as a federated root server.

Binary packages are available on the ZeroTier site and source code is found on GitHub.

After the service is installed and started, networks can be joined using their 16-digit network IDs. Each network appears as a virtual "tap" network port on your system that behaves just like an ordinary Ethernet port.

ZeroTier runs as Admin

There are two separate ZeroTier apps on PCs.

There is a ZeroTier system service. It runs as Admin. It does all the networking. There is a user interface tray app. It does not run as Admin. It talks to the service to join and leave networks.

For the app to talk to the service, it needs access to the secret token. If the user running the UI app can't access the token, it can't talk the service, so they can't leave or join networks or change other settings.

During install, the token is copied to a location that the installing user can access.

Configuration Files


The ZeroTier One service keeps its configuration and state information in its working directory. The working directory location is:

  • Windows: C:\ProgramData\ZeroTier\One
  • macOS: /Library/Application Support/ZeroTier/One
  • Linux: /var/lib/zerotier-one
  • FreeBSD/OpenBSD: /var/db/zerotier-one

Network Specific Configuration

See $WORKING/networks.d in the working directory

<network-id>.conf is a binary file. You can't edit it by hand

If you place an empty file named <network-id>.conf in networks.d, ZeroTier will join that network when it starts.

<network-id>.local.conf text file with the network's settings

The contents look like this:


These settings apply to the specific ZeroTier network.

Here is a summary of their meanings:

  • Allow Managed. Default Yes. Allow ZeroTier to set IP Addresses and Routes ( local/private ranges only)
  • Allow Global. Default No. Allow ZeroTier to set Global/Public/Not-Private range IPs and Routes.
  • Allow Default. Default No. Allow ZeroTier to set the Default Route on the system. See Full Tunnel Mode.
  • Allow DNS. Default No. Allow ZeroTier to set DNS servers.

ZeroTier will use these settings when it starts. If you change these settings from the UI or zerotier-cli, the file will update. If you edit the file directly, you need to restart the service.


Some user specific settings may be stored in the user's path:

  • C:\Users\<User>\AppData\Local\ZeroTier (Windows)
  • ~/Library/Application\ Support/ZeroTier (macOS)

Local Configuration Options

A file called local.conf in the ZeroTier home folder contains configuration options that apply to the local node. It can be used to set up trusted paths, blacklist physical paths, set up physical path hints for certain nodes, and define trusted upstream devices (federated roots). Most of the time, you don't need to change any of these settings.

In a large deployment it can be deployed using a tool like Puppet, Chef, SaltStack, etc. to set a uniform configuration across systems.

local.conf is a JSON format file that can also be edited and rewritten by ZeroTier One itself, so ensure that proper JSON formatting is used. Paste your JSON into a JSON tool before saving your configuration file.

Settings available in local.conf (this is not valid JSON, and JSON does not allow comments):

"physical": { /* Settings that apply to physical L2/L3 network paths. */
"NETWORK/bits": { /* Network e.g. or fd00::/32 */
"blacklist": true|false, /* If true, blacklist this path for all ZeroTier traffic */
"trustedPathId": 0|!0 /* If present and nonzero, define this as a trusted path (see below) */
} /* ,... additional networks */
"virtual": { /* Settings applied to ZeroTier virtual network devices (VL1) */
"##########": { /* 10-digit ZeroTier address */
"try": [ "IP/port"/*,...*/ ], /* Hints on where to reach this peer if no upstream/roots are online */
"blacklist": [ "NETWORK/bits"/*,...*/ ] /* Blacklist a physical path for only this peer. */
"settings": { /* Other global settings */
"primaryPort": 0-65535, /* If set, override default port of 9993 and any command line port */
"portMappingEnabled": true|false, /* If true (the default), try to use uPnP or NAT-PMP to map ports */
"softwareUpdate": "apply"|"download"|"disable", /* Automatically apply updates, just download, or disable built-in software updates */
"softwareUpdateChannel": "release"|"beta", /* Software update channel */
"softwareUpdateDist": true|false, /* If true, distribute software updates (only really useful to ZeroTier, Inc. itself, default is false) */
"interfacePrefixBlacklist": [ "XXX",... ], /* Array of interface name prefixes (e.g. eth for eth#) to blacklist for ZT traffic */
"allowManagementFrom": [ "NETWORK/bits" ]|null, /* If non-NULL, allow JSON/HTTP management from this IP network. Default is only. */
"allowTcpFallbackRelay": true|false /* Allow or disallow establishment of TCP relay connections (true by default) */
  • trustedPathId: A trusted path is a physical network over which encryption and authentication are not required. This provides a performance boost but sacrifices all ZeroTier's security features when communicating over this path. Only use this feature if you know what you are doing and really need the performance! To set up a trusted path, all devices on the same trusted physical network must have the same trusted path ID. Trusted path IDs are arbitrary unsigned 64-bit integers. These are not secrets. The security of a trusted path depends on its physical configuration. Take special care that any firewalls at its boundaries do not allow traffic in our out with IPs overlapping the trusted network range.

An example local.conf:

"physical": {
"": {
"blacklist": true
"": {
"trustedPathId": 101010024
"virtual": {
"feedbeef12": {
"role": "UPSTREAM",
"try": [ "" ],
"blacklist": [ "" ]
"settings": {
"softwareUpdate": "apply",
"softwareUpdateChannel": "release"

authtoken location

The installer copies authtoken.secret to the installing user's path.

To control the ZeroTier system service, you need the token. If you don't have the token, you can't leave or join networks, for example. The UI app uses the token to control the system service. The cli, zerotier-cli, uses it also.

The token is called authtoken.secret and it is stored in the ZeroTier working directory. You need to be Admin to access the working directory.

The user's copy of authtoken.secret is in:

  • C:\Users\<User>\AppData\Local\ZeroTier (Windows)
  • ~/Library/Application\ Support/ZeroTier (macOS)

If you don't want a user to control ZeroTier, don't give them this file and don't give them access to the working directory.